Functional Description - Bosch GBH 5-40 DCE Professional Original Operating Instructions

OBJ_DOKU-21901-003.fm Page 8 Wednesday, October 13, 2010 10:19 AM
8 | English
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for hammer drilling in
concrete, brick and stone as well as for chisel-
ling.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Dust protection cap
2 Locking sleeve
3 Mode selector switch
4 Vibration damper
5 On/Off switch
6 Handle (insulated gripping surface)
7 Thumbwheel for speed preselection/impact
frequency preselection
8 Service indicator
1 609 929 W80 | (13/10/10)
9 Stand-by indicator
10 Auxiliary handle (insulated gripping surface)
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Rotary Hammer
Article number
Rated power input
Rated speed min
Impact rate
– Drilling mode min
– Chiselling mode min
Impact energy per
stroke
Chisel positions
Tool holder
Lubrication
Max. drilling dia.
– Concrete
(with twist drill) mm
– Concrete
(with break-
through drill bit) mm
– Brickwork
(with core bit) mm
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
GBH 5-40 DCE
Professional
3 611 B64 0..
W 1150
-1
170 – 340
-1
1500 –2900
-1
1500 –3050
J 11
12
SDS-max
Central
permanent
lubrication
40
55
90
kg 6.8
/II
Bosch Power Tools