IpLink 2884/2888 Getting Started Guide
Introduction
This section provides information on the cables used to connect the IpLink and the interface cards to the exist-
ing network infrastructure and to third party products.
Console
The IpLink can be connected to a serial terminal over its serial console port, as depicted in
CAUTION
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each IpLink 288x device
Note
See section
Introduction
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
Figure 11. Connecting a serial terminal
"Console port"
on page 48 for console port pin-outs.
C • Cabling
figure
11.
43