Hisense 32H5B Quick Start Manual page 6

Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1. Remove the TV stand if you already attached it.
2. Place the TV face down on a clean, safe and cushioned
surface.
3. Place the spacers (not included) in the corresponding bracket
holes.
Spacer
(not provided)
CAUTION:
• When you attach the mount, be sure to use the spacers
(provided by the third-party manufacturer) between the TV
and the bracket.
Screw
(not provided)
Bracket
(not provided)
• To prevent internal damage to the TV and ensure it is
mounted securely, be sure to use fixing screws (not
provided) that are 8 - 9.5 mm(32"/40") / 9.5 - 11.5 mm(50")
in length when measured from the attaching surface of the
mounting hook.
8 - 9.5 mm(32"/40")
Rear cover of the TV
Wall-mount hole pattern
VESA (mm)
Wall-mount screw size (mm)
Follow instructions provided with the Wall-Mount bracket.
If you are not sure of your ability to complete the installation,
then contact the wall-mount manufacturer or the retailer from
which you purchased the TV.
The selected screws are 8 - 9.5 mm(32"/40") / 9.5 - 11.5 mm
(50")in length when measured from the attaching surface of
the rear TV cover. The diameter and length of the screws differ
depending on the Wall-Mount Bracket model.
NOTE: The diameter and length of the screws differ
depending on the wall mount bracket model.
9.5 - 11.5 mm(50")
Wall-mount bracket
Screw
Spacer
100 × 100 (for 32"/40")
200 × 400 (for 50")
M4(32"/40")
M6(50")
Page 5