Selecting The Input Source - Hisense 32H5B Quick Start Manual

H5 series

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Select

• The Select Network : Connect your TV to access the

Network

network.

• When the Network Setting menu opens, Hisense Service

Terms and Conditions will appear. Press ◄/► button

to scroll through the pages. Please read it carefully. If

you want to access the Internet, select Agree to set your

network connection for the TV.

Otherwise, select Disagree to enter the Channel search

menu.

• You can set up the network configuration in this menu.

For more information, please refer to the section titled

"Network Connection" and "Network Setup" in the user

manual online.

Channel

• Select your Tuner Mode: Antenna or Cable, press ENTER

button to confirm.

• Set the Channel Installation: Scan or Skip Scan. If you

select Scan, your TV automatically starts Channel

Installation available in your viewing area; If you select

Skip Scan, your TV does not scan for channels;

Depending on the reception condition, it may take up to

30 minutes or more to complete memorizing channels.

Please allow the process to complete without interruption.

• After the TV has completed scanning for channels, select

Go to exit the wizard.

NOTE: If you are using a cable or satellite box and you have

connected it to the TV using a coaxial cable, you should

select the cable option. Be sure the cable or satellite box

is turned on before starting the channel scan. If you use a

cable or satellite box connected to AV, Component or HDMI,

you don't need to scan for channels.