Neopost DS62 Operator's Manual page 25

On the Document Settings screen:
1. Select or
will appear around the document setting.
2. Select "Edit" to change the selected setting.
3. Select to confirm the changed settings, or press the escape button
return to the previous screen without changing the settings.
• Select to set the number of sheets for each
feeder.
- Select "Edit" to change the settings. The
Sheets Setting screen will appear.
- Select "Feeder" to select the feeder (select
feeder 1, 2, or 3). The number of the selected
feeder will be displayed.
- Select or
sheets that must be picked from the selected
feeder.When the number of sheets is 0, the
relevant feeder will be deselected.
- Select
• Select to enter the document height.
- Select "Edit" to change the settings. The
Sheet Size screen will appear.
The height or the ISO format of the document
will be displayed next to the relevant feeder.
- Select "Feeder" to select the feeder (select
feeder 1, 2, or 3). The number of the selected
feeder will be displayed.
- Select or
dimension of the document.
Dimensions can be entered in mm, inches or as standard ISO paper dimensions
(depending on the installation settings).
The machine will not allow you to enter dimensions beyond the technical ranges.
Feeder 3 (top tray) can not handle documents smaller then 115 mm (4.5"), unless the
Intermediate Transport Option is installed. When the Intermediate Transport is
installed, the minimum document height is 90 mm (3.5").
- Select
to choose the required document setting. When selected, a black box
to enter the number of
to confirm the changed settings.
to enter the exact
to confirm the changed settings.
ESC
to
25