OPERATING FAULTS
Electrical equipment
– The headlights no
One only:
longer operate.
Both:
– Traces of condensation in the lights.
(continued)
CAUSES
– blown bulb.
– feed wire disconnected or connector
out of position.
– faulty earth connection.
– if the circuit is fused.
This is not a fault. The presence of traces
of condensation in lights is a natural phe-
nomenon linked to variations in tempera-
ture.
These traces soon disappear when the
lights are switched on.
WHAT TO DO
Replace the bulb.
Check and reconnect the wire or the
connector.
See above.
Check and replace if necessary.
5.35