Chapter 2 General Information; Periodic Maintenance; Ordering Parts; Returning Units To Lexicon For Service - Lexicon Studio Core2 Service Manual

Desktop
Hide thumbs Also See for Studio Core2:
Table of Contents

Advertisement

Chapter 2 General Informat i on

Periodic Maintenance

Under normal conditions the Lexicon Studio Core2 system requires minimal maintenance. Use a soft, lint-
free cloth slightly dampened with warm water and a mild detergent to clean the exterior surfaces of the
connector box.
Do not use alcohol, benzene or acetone-based cleaners or any strong commercial cleaners. Avoid
using abrasive materials such as steel wool or metal polish. It the unit is exposed to a dusty environment, a
vacuum or low-pressure blower may be used to remove dust from the unit's exterior.

Ordering Parts

When ordering parts, identify each part by type, price and Lexicon Part Number. Replacement parts can be
ordered from:
LEXICON, INC.
3 Oak Park
Bedford, MA 01730-1441
Telephone: 781-280-0300; Fax: 781-280-0499; email:
ATTN: Customer Service

Returning Units to Lexicon for Service

Before returning a unit for warranty or non-warranty service, consult with Lexicon Customer
Service to determine the extent of the problem and to obtain Return Authorization. No equipment
will be accepted without Return Authorization from Lexicon.
If Lexicon recommends that a Lexicon Studio Core2 be returned for repair and you choose to return the unit
to Lexicon for service, Lexicon assumes no responsibility for the unit in shipment from the customer to the
factory, whether the unit is in or out of warranty. All shipments must be well packed (using the original
packing materials if possible), properly insured and consigned, prepaid, to a reliable shipping agent.
When returning a unit for service, please include the following information:
Name
Company Name
Street Address
City, State, Zip Code, Country
Telephone number (including area code and country code where applicable)
Serial Number of the unit
Description of the problem
Preferred method of return shipment
Return Authorization #, on both the inside and outside of the package
Please enclose a brief note describing any conversations with Lexicon personnel (indicate the name of the
person at Lexicon) and give the name and telephone daytime number of the person directly responsible for
maintaining the unit.
Return the Core2 board, connector box and cable. Do no include accessories such as manuals, audio
cables, footswitches, etc. with the unit, unless specifically requested to do so by Lexicon Customer Service
personnel.
csupport@lexicon.com
Lexicon
2-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Studio Core2 and is the answer not in the manual?

Questions and answers

Table of Contents