Lexicon Studio Core2: Update Patch V120-P1 Won't Unzip Properly; C2V120P2.Reg - Update; Lexicon Studio Core2: In Cubase®, The Lexpanel Does Not Get Properly Shut Down From The Task Bar - Lexicon Studio Core2 Service Manual

Lexicon
=====================================================================
Addendum #7: CLOCK SOURCE CONSISTENCY IN CUBASE
Whenever changing the clock source setting within Cubase, it is a
good practice to verify that the identical setting is selected in
the LexPanel clock source tab at that time. Any differences in these
settings could result in undesirable static. If such a condition
should occur, simply invoke the LexPanel from the task bar, and
Lexicon Studio will internally correct this problem.
=====================================================================

Lexicon Studio Core2: Update patch v120-P1 won't unzip properly

Problem: Update patch v120-P1 won't unzip properly. Tells you that the file is locked or in use.
Solution: (This solution has worked in some cases).
1. Remove Core2 from Add/Remove programs
2. Remove Lexicon IDS Sound System from Device Manager
3. Remove LexiconIDSCORE2.INF from C:\Windows\Inf\Other
4. Restart computer and re-install drivers. DO NOT RESTART after running the Setup program.
5. Unzip the update patch (it should go to C:\Lxstudio
6. Restart the computer

C2V120P2.reg - Update

http://www.lexicon.com/downloads/studio_download.htm#Core2SP2
Once downloaded, follow these instructions:
1. Move C2V120P2.reg to your desktop.
2. Double-click on icon and let it run.
3. Restart your computer.
The Lexpanel should now launch. If you continue to have problems, please contact Lexicon Customer
Service Technical Support.
Lexicon Studio Core2: In Cubase®, the LexPanel does not get properly shut down
from the task bar.
While in Cubase®, the LexPanel does not get properly shut down from the task bar.
Q: What is the condition?
A: When attempting to Launch the LexPanel from the task bar, the hour glass appears briefly then
disappears with no resulting action.
Q: What is the cause?
A: This is a result of hitting Cancel at the "Lexicon Studio Control Panel Selection" prompt.
Q: What is the solution?
5-9