Extending Module Ipncx-Mod, Nc-Mod4 And Nm-Mod4 - Telsyco IPDP – 00 Installation And Operating Instructions Manual

1.3.2 Extending Module IPNCx-mod, NC-mod4 and NM-mod4

This module is supplied in three designs. The IPNCx-mod module
(picture 6) has four buttons and includes the electronics to be connected to the
basic module. The NC-mod4 module has four buttons and includes the
electronics to be connected to the IPNCx-mod or to previous NC-mod4 module.
This module is only connected by flat cable – buttons and lighting through is
already interconnected. The terminals for connection of other four buttons and
current supply of lighting are further placed on module (on following NM-mod4).
The NM-mod4 module is always connected to previous IPNCx-mod or
NC-mod4. The connection is not prepared and should be done by conductors –
see on picture 5.
Picture 5 Connection of (IP)NC-mod4 and NM-mod4
IPDP - installation and operating instructions
9