Table of Contents
Advertisement
3.2 Setting DoorPhone parameters
3.2.1 Basic Parameters
After making changes use the save changes button.
1 – Mode of DoorPhone choice selects number per Day/Night DoorPhone
mode or selects numbers of the first and second groups.
2 – Sign for call extension * or # (10sec before call end the DoorPhone will send
a notice, then the call may be extended)
3 – Two commands in order to hang up the DoorPhone using both switches
[2 digits].The advantage is to set the same command both for switch closing
and command to guard hanging up (page 24).
4 – Command for DAY / NIGHT mode switching
Note: The switchover to Day/Night mode remains set in guard even after
power supply disconnection.
5 – Dialing as on normal telephone (all number of called person should be
pressed on keyboard) - recommended for use SIP proxy server.
Only 2-digit memory number is entered on keyboard by which the number of
called person is stored (memory number corresponds to button number with
respect to Day/Night switchover) - recommended for use P2P.
6 – =0 only NC-mode connected to the basic module
=1 the keyboard connected on the first position (after IPNCx-mod)
=2 the keyboard connected on the second position (after first NC-mod4)
=3 the keyboard connected on the third position (after second NC-mod4)
explanation of position keyboard is on chapter 1.3.2 (page 9)
7 – Default value – presetings to the firm settings. After making changes use
the save changes button.
ATTENTION! This parameters setting will sharply influence whole DoorPhone
function.
IPDP - installation and operating instructions
23
Advertisement
Table of Contents
