Introduction; Application-Convert Legacy Pbx To Voip; Internet Telephony Iad Application - Patton electronics SMARTNODE 4940 Getting Started Manual

SmartNode 4940 Getting Started Guide

Introduction

Patton's SmartNode Enterprise VoIP Media Gateways deliver the features you need for advanced multiservice
voice and data network applications. They combine high quality voice-over-IP with powerful quality of service
routing functions to build professional and reliable VoIP and data networks. This chapter describes typical
applications for which this SmartNode is uniquely suited.
Note
Detailed configuration information for the applications can be found on the
CD-ROM that was included with your SmartNode device or online from
the Patton webserver at www.patton.com.
Application—Convert Legacy PBX to VoIP
The SmartNode 4940 Series can be used to make and receive calls to and from the public ISDN network and
Internet Telephony services on any ISDN Terminal (Phone or PBX) (see
urable routing tables, an outbound call can be directed to the local PSTN connection or to an Internet tele-
phony service provider (ISTP). Inbound calls from the Internet and the PSTN can ring the same phone.
For an installation where there are existing routers and access modems, the SN4940 is a cost-effective solution
to bring SIP-trunking service to a traditional PBX. .
Introduction
Figure 4. Internet telephony IAD application
2 • Applications overview
figure 4). Using individually config-
21