Download Print this page

Millenium Slow Stick X Assembly Instructions Manual page 6

Hide thumbs Also See for Slow Stick X:

Step-16:

Install DO NOT glue WT1 and

WT2.

Step-17: Glue wing tip assembly to W4 wing

tip. Be sure the trailing edge is straight with the

main wing trailing edge.

Step-18: Glue wing tip stiffeners WT4, WT5

and WT7 in place.

Step-19: Round-off leading edge and tip of

wing. Leave trailing edge flat, but sand flush

TE-A and TE-B.

Step-20: Sand 3/16 Square leading edge piece

flush with Part LE so that plywood part P1 sits

flat.

Step-21: Glue P1 in place.

Table of Contents

Need help?

Do you have a question about the Slow Stick X and is the answer not in the manual?

X-trainer