Specifications; Intended Use; Ec Declaration Of Conformity - Makita DF331D Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Drilling capacities Steel
Wood
Fastening Wood screw
capacities
Machine screw
No load speed High (2)
Low (1)
Overall length
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and development, the speciications herein are subject to change
without notice.
• Speciications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model DF331D
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model DF031D
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model DF331D
Work mode: drilling into metal
Vibration emission (a ) : 2.5 m/s
h,D
Uncertainty (K) : 1.5 m/s
Model DF031D
Work mode: drilling into metal
Vibration emission (a ) : 2.5 m/s
h,D
Uncertainty (K) : 1.5 m/s
BL1015, BL1020B
1.1 kg
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
2
or less
2
2
or less
2
DF331D
10 mm
21 mm
5.1 mm x 63 mm
M6
0 - 1,700 min
0 - 450 min
189 mm
D.C. 10.8 V
BL1040B
1.3 kg
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures to
protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Driver Drill
Model No./ Type: DF331D, DF031D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical ile in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
25.2.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
DF031D
-1
-1
157 mm
BL1015, BL1020B BL1040B
0.94 kg
ENGLISH
1.1 kg
5