Frigidaire FNG576CFSWB User Manual page 14

Cleaning The Hob
Removal of Surface Burners for Cleaning
Turn all controls OFF.Allow hob to cool before removing grates and burner parts.
When removing the burner caps and heads, remember their size and location. Replace
them in the same location after cleaning.
Round Burner
The burner caps and burner heads can be
lifted off the hob.
Cleaning The Burners
Burner Caps
Wash burner caps in hot, soapy water and
rinse with clean water. You may scour with
a plastic scouring pad to remove burned-on
food particles. The round caps may also be
cleaned in your dishwasher.
Burner Heads
Wash the burner heads routinely, especially
after bad spillovers, which could clog the
openings. Lift burners off when cool. Use
hot, soapy water. Rinse with clean water.
For more stubborn stains, use a brush
with plastic bristles.
NOTE: Do not use steel wool or scouring
powders to clean the burner parts as these
may clog the parts. Never wash burner heads
in your dishwasher as dishwasher detergents
will discolor your burners. The ports in the
burner heads must be kept clean at all times
for an even, unhampered flame. Clogged or
dirty burner ports or electrodes will not allow
the burner to operate properly.
14
Round Burner Cap
(Removable)
For proper ignition, make sure the small hole
in the notch that fits over the electrode is
kept open. A sewing needle or wire twist-tie
works well to unclog it
After cleaning
Before putting the burner caps, shake out
excess water and allow them to dry thoroughly.
Replacing Burner Heads
Replace burner heads in the correct locations
according to size.
Burner Caps
Replace burner caps on burner heads. Make
sure each cap fits securely and sits flat on
its corresponding burner head.
Round hole in
burner head must
be kept clear