Display-Layout; Function Key Settings; Settings On The Web Interface - Snom D7 User Manual

snom D7 User Manual
D
isplay-Layout
Two layout types are available, line and tile. You can set the layout type on the function key page of
the connected phone's web interface or on the phone itself.
Setting on web interface
1. Open the connected phone's web interface.
2. Click on Function Keys in the menu on the left side (see Fig. 23, above).
3. Select line or tile layout from the drop-down menu of the expansion module (see Fig. 24 and 25,
below).
4. Click on Apply at the bottom of the page.
Setting on the phone
See "Display Layout" on page 12.
F
unction key settings
You can configure the function key settings on the function key page of the connected phone's web
interface or on the phone itself.

Settings on the web interface

When a D7 module is connected to the phone, its function keys are displayed on the function key page
of the phone's web interface. If there is more than one module, the first module in the daisy chain
is listed as expansion module 1 on the function key page, the second module in the chain is listed as
expansion module 2, and the third module in the chain as expansion module 3.
The settings stored on the phone are not erased or deleted when the expansion module is
disconnected. You will no longer see them on the function keys page of the phone, but they will be
available for use with any other D7 expansion module you connect to the phone. If you want to delete
them, you can only do so while the expansion module is attached. For example, if you wish to delete
the stored settings for a third expansion module, but you only have two expansion modules connected
to the phone, you must temporarily connect a third module until you have deleted the settings on the
phone's Function Keys page.
1. Open the connected phone's web interface.
2. Click on Function Keys in the menu on the left side (see Fig. 23, above).
3. After selecting Context and Type and entering the number or other value for the key you want to
configure, enter the Short Text for the key label on the expansion module's display.
For more information on the available functions and on how to program and use the keys, please
refer to the connected phone's manual, chapter "Programming the Function Keys". You can
download the manual at http://wiki.snom.com.
4. Click on Apply at the bottom of the page.
16
Configuring the Function Keys