Function Key Leds - Snom D7 User Manual

snom D7 User Manual
F
unction key LEDs
Depending on the function mapped onto the key, the LEDs on the key will light up when the key event
occurs or when the key is pressed; they will go out when the key event has ended or when the key is
pressed again. Examples:
◦
Forwarding all calls: When the key is pressed, its LED will light up and remain on until call
forwarding is turned off.
◦
Extension monitoring: When the monitored extension is busy, the LED will remain on until the
extension is not busy anymore.
◦
Presence status (with UC edition firmware): The LED will signal the availability status of the
contact the same way a Presence key on the connected phone will. For more information,
please refer to the snom UC edition User Guide for the phone.
For more information on the available functions and on how to program and use the keys, please refer
to the phone's manual, chapter "Programming the Function Keys".
Getting to Know your Expansion Module
14