Hotpoint RGH946GEJ Use And Care Manual page 30

Table of Contents

Advertisement

Questions?
Use This Problem Solver
PROBLEM
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
All
These Things Are Normal
with Your Microwave Oven:
Steam or vapor escaping from
around the door.
. Light reflection around door or
outer case.
TOP BURNERS DO
NOT LIGHT
POSSIBLE CAUSE AND REMEDY
Door not securely closed.
. ON button must be pressed before oven can be programmed.
Temperature probe not inserted properly during Temp Cook functions.
START must be touched after entering cooking selection.
Another selection entered already in oven and CLEAR not touched to cancel it.
Make
sure you have entered cooking time or temperature.
Clear was touched accidentally. Reset cooking program and touch
Cooking times may vary because of starting food temperature, food density or amount
of foods in oven. Enter additional cooking time for completion.
Incorrect power level entered. Check cookbook for recommended power level or
changing levels during cooking if necessary.
Dish was not rotated, turned or stirred. Some dishes require specific instructions.
Check cookbook or recipe for these instructions.
Too many dishes in oven at same time. Cooking time must be increased when cooking
more than one food item. Check cookbook for recommendation on increasing time.
Dimming oven light and change
in blower sound may occur while
operating at power levels other
than high.
is ot3eratin~.
,
Make sure electrical plug is plugged into a live, properly grounded power outlet.
Burner holes on side of burner may be clogged. Remove and clean them.
Burners not fitted correctly onto mounting brackets. Remove and reinstall properly.
might be noticed while using your
microwave oven, It's similar to the
interference caused by other small
appliances and does not indicate a
problem with your oven.
30
START.

Advertisement

Table of Contents
loading

Table of Contents