Network Settings
•
Press ENTER to enter the Network Settings menu. See
page 56
for more details.
•
Reset All Settings
Press ENTER to reset all settings to default value.
Audio Settings menu
•
Mute
Press ◄/► to enable or disable the mute function.
•
Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off, the screen will
display in the upper right corner of the screen.
To restore the sound, press MUTE again.
•
Using the OSD menu
1. Press MENU and then press ◄/► until the System Setup: Advanced menu is
highlighted.
2. Press ▼ to highlight Audio Settings and press ENTER. The Audio Settings page displays.
3. Highlight Mute and press ◄/► to select On.
4. To restore the sound, repeat steps 1-3 and press ◄/► to select Off.
•
Volume
Press ◄/► to adjust the volume of the projector.
•
Using the remote control
Press VOLUME+/VOLUME- to select a desired sound level.
•
Using the OSD menu
1. Press MENU and then press ◄/► until the System Setup: Advanced menu is
highlighted.
2. Press ▼ to highlight Audio Settings and press ENTER. The Audio Settings page displays.
3. Press ▼ to highlight Volume and press ◄/► to select a desired sound level.
Build-in speaker
•
Press ◄/► to enable or disable the built-in speaker.
•
Power on/off Ring
Press ◄/► to enable or disable sound when the projector turns on or off.
Note:
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or changing the
sound level will not affect the Power on/off ring tone.
"Network Settings menu" on
53