WASH HEATER TROUBLE
When checking the voltage between connectors
) during whites washing, Is the voltage
220 - 240V~?
After power off, is the resistance of wire
(RED-YELLOW) connectors between 10 ~30 Ω ?
After power off and the heater terminal is
disconnected, is the resistance 10~30 Ω?
HEATING CONTINUOUSLY ABOVE
THE SETTING WATER TEMPERATURE
When disconnect the connector (1)on the, MAIN
PWB ASSEMBLY is the resistance of the natural
2.5kΩ to 180kΩ (105
When checking THERMISTOR on the tub is the
THERMISTOR loosened above 2mm from the
Replace the MAIN PWB
Replace the HEATER
Replace the THERMISTOR
Push the THERMISTOR
tightly to the rubber.