LG WD(M)-14400(5)TB Service Manual page 16

ERROR
8 CURRENT
ERROR
LOCK ERROR
9
WATER LEAKS
10
POWER
11
FAILURE
SYMPTOM
MAIN PWB ASSEMBLY is out of order
Winding in the STATOR ASSEMBLY is short-circuited.
The connector (3-pin, male, white) in the LEAD WIRE
ASSEMBLY is not connected to the connector (3-pin,
female, white) of STATOR ASSEMBLY.
The electric contact between the connectors 3-pin,
male, white in the LEAD WIRE ASSEMBLY and 4-pin,
female, natural in the MAIN PWB ASSEMBLY is bad or
unstable.
The LEAD WIRE ASSEMBLY between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut (open
circuited).
WIRE ASSEMBLY
The hall sensor is out of order / defective.
Water leaks
[WD(M)-14400(5)TB/13400(5)TB/12400(5)TB/11400(5)TB]
The washer experienced a power failure.
Restart the cycle.
15
CAUSE
Replace the MAIN PWB ASSEMBLY
Replace the STATOR ASSEMBLY
Reconnect or repair the connector
Reconnect or repair the contact in the connector
Repair the damaged (open-circuited) the LEAD
Replace the STATOR ASSEMBLY