Maintenance; Troubleshooting - Black & Decker GSP401 Instruction Manual

• Start by trimming the top of the shrub.
Hold the tool at the desired angle and
move it steadily along the line of cut. The
double-sided blade allows you to cut in
either direction.
• In order to obtain a very straight cut,
stretch a piece of string along the length
of the shrub at the desired height. Use
the string as a guide line, cutting just
above it.
• In order to obtain flat sides, cut upwards
with the growth (fig. I). Younger stems
move outwards when the blade cuts
downwards, causing shallow patches in
the shrub.
• Take care to avoid any foreign objects.
Especially avoid hard objects such as
metal wire and railings, as these could
damage the blades.
• Spray the blade with a light coating of
general purpose oil before first use and
whenever the blades begin to look dry.

MaInTenance

Your BLACK+DECKER tool has been
designed to operate over a long period
of time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
warnInG:
maintenance on or cleaning the tool, switch
off the tool and unplug the extension cord.
• Regularly clean the ventilation slots on
your tool using a soft brush or dry cloth.
Problem
• Tool will not start.
For assistance with your product, visit our website www.blackanddecker.com for the location of
the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986.
Before performing any

TrouBleSHooTInG

Possible cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the product
• Cord or switch is
damaged.
• Lock-off button not
actuated.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
• After each use, carefully clean the
blades. After cleaning, apply a film of
light general purpose oil to prevent the
blades from rusting.
TranSPorTInG
Always unplug the cords and remove the
blade when transporting the tool.
SToraGe
warnInG:
To prevent accidental operation, insure
that extension cord is unplugged from
the handle. Failure to do this could result in
serious personal injury.
1. Unplug extension cord from tool.
2. The best storage place is one that is cool
and dry away from direct sunlight and
excess heat or cold. Keep mechanics
clean and free of debris.
acceSSorIeS
• Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
please call: 1-800-544-6986.
warnInG:
not recommended for use with this tool could
be hazardous.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue use
immediately and have it serviced
at a BLACK+DECKER service center
or authorized servicer.)
repeatedly causes the circuit
breaker to trip, discontinue use
immediately and have it serviced
at a BLACK+DECKER service
center or authorized servicer.)
• Have cord or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.
• Push lock off button and then
depress the trigger switch.
12
Sharp moving blade.
The use of any accessory