Installing Procedure - Sony SEL90M28G Service Manual

4-1-3. Preparations for Equipments
(1) Setting of Equipments
Set the equipments and the lens to be tested as shown below.
・In the case of zoom lens
Flange back
Flange back
adjustment jig
adjustment jig
(J-6082-563-A)
FB Adjustment chart
or
Siemens star chart
(J-6080-875-A)
USB cable
(1-829-868-41)
HASP key
Personal computer To USB connector
(The SeusEX must be installed in the PC.)
OS: Windows Vista / 7
RAM: 256 MB or more recommended (Windows 7)
1 GB or more recommended (Windows Vista)
USB port: USB 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Run time: .NET Framework 2.0
(.NET Framework 2.0 is installed at lens adjustment
program installation, if it is not installed.)
SEL90M28G (FE 2.8/90 MACRO G OSS) (FE 90mm F2.8 Macro G OSS)
・In the case of fixed focal lens
Within 10 mm Within 10 mm
Flange back
adjustment jig
Lens to be tested Lens to be tested
AC adaptor
(AC-PW20)
(1-487-963-12:EXCEPT US, CND)
(1-487-963-22:US, CND)
Lens to
be tested
Camera
To USB connector (ILCE-5000)
To tripod screw
Tripod
(optional)
Fig. 4-1-2
A flange back adjustment jig and a flange back adjustment chart are necessary for the Flange Back (S) adjustment.
Enlarge the flange back adjustment chart to the specified size and print it fully on the paper.
Size specification: White width 10 mm, black width 10 mm
FB Adjustment chart
10 mm
10 mm 10 mm
AC
The following settings of the printer allows printing that nearly meets the specification.
• Page enlargement/reduction: None
• Magnification: 200%
However, fine-adjust the rate of magnification before printing the chart because the magnification error varies with printer types.

4-2. INSTALLING PROCEDURE

Note: Make sure to perform the installation only by the management.
Do not change the folder to be installed in.
4-2-1. Procedure of Installing the E-Mount Lens Adjustment
1. Download the lens adjustment program (E-Mount Lens Adjustment.zip).
2. Double click the setup.exe file.
Fig. 4-2-1
3. The installer screen appears, then click the [Next] button.
Fig. 4-2-2
4-2