Table of Contents
Advertisement
(2) Finishing the E-Mount Lens Adjustment
1. Click the [Disconnect] button and check that the connection status becomes "Disconnect".
Fig. 4-3-3
2. Click the [×] button on the upper right of the main window to finish.
3. Turn off the power of camera.
4-3-2. E-Mount Lens Adjustment
Note: If the "PUSH ENTER" does not disappear even after pressing the ENTER key, press it again.
Do not touch the focus ring when performing operations on lens side, as the focus is on ∞ status during adjustment.
(1) Method of Adjustment
1. Start the E-Mount Lens Adjustment.
2. Click the button for corresponding adjustment item in the Adjustment and Inspection.
3. Perform the adjustment according to the instruction on the adjustment screen.
4. "FINISHED" appears on the pop-up window when the adjustment is complete, then click the [OK] button.
Fig. 4-3-4
SEL90M28G (FE 2.8/90 MACRO G OSS) (FE 90mm F2.8 Macro G OSS)
* The adjustment result is displayed on the Message History window.
* Click the [Clear] button, the histories displayed on the Message History window will be deleted.
(2) Method for adjusting the "Lens Device (S)"
For item of the "Lens Device (S)", operation on lens side is required.
1. When the [Lens device (S)] button is clicked, START screen is displayed, push the ENTER key.
Fig 4-3-6
2. "Change Focus Mode SW to MF side." is displayed, select the focusing ring to MF.
Fig 4-3-7
4-4
Fig. 4-3-5
Hide quick links:
Advertisement
Table of Contents
