Disassembly - Pioneer AVH-X8500BHS Service Manual

1

7. DISASSEMBLY

While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same.
A
- Method for opening the flap manually (Fig.1)
Insert a tip of screwdriver whose diameter is
approximately 2mm into the slit at the bottom surface
of the product and slide the flame part to the direction
indicated by an arrow.
B
- Removing the Monitor Assy and the Case Unit (Fig.2)
1
Remove the two screws.
C
2
Pull out the Monitor Assy and the Case Unit
in the direction indicated by an arrow.
D
Reverse the top and bottom of the product.
3
Push the two tabs and then remove the Cover.
E
4
Disconnect the connector and then remove
the Monitor Assy and the Case Unit.
F
94
1
2
1
Monitor Assy
3
Monitor Assy
AVH-X8500BHS/XNUC
2
3
2
Case Unit
Cover
3
4
Case Unit
3
4
Fig.1
1
Fig.2
4