Philips HDP2510 User Manual page 19

Update firmware with USB
storage medium
You can find the Screeneo firmware version on
the Philips website: www.philips.com
You must download the file on USB storage
medium in order to update your projector.
Notice
Do not turn off the device during the
update process!
Download from website
1 Launch an Internet browser, in the address
bar, type the address: www.philips.com
2 Select your country and your language.
3 In the search bar, type the device Screeneo
and your model HDP2510.
4 The Screeneo HDP2510 projector screen
appears. In the new screen, research Support
and click on Software & drivers.
5 In the Software & drivers screen select your
language and click Download file.
Notice
The file on the website is a zip file. It has
to be unpacked and put on the root
folder of the USB stick.
On the projector
1 Check that the device is connected to power
supply.
2 Connect the USB storage medium to the pro-
jector's USB socket.
Connect to the playback device
CAUTION!
Never pull out the digital media while
the device is accessing it. This could
cause data to be damaged or lost.
Turn the device off in order to make
sure that the device does not access
the USB storage medium.
3 To turn on the projector, press the B button
on the panel control of the device or on the
remote control once.
4 Press the OPTION/Ă button and use ¡/¢
to select System.
5 Confirm with OK.
6 Use ¡/¢ to select Firmware update.
7 Confirm with OK.
A message displays asking if you want to
update the new firmware. Confirm with OK
(YES).
If no firmware was found on the USB stick or
if no USB stick is plugged in a message
appears.
If you do not wish to update the firmware at
this point, you can exit the menu by pressing
À/Á to select NO and confirming with OK
or exit with the BACK/¿ button.
8 A message displays informing you that the
installation process will take some minutes
and that the projector will reboot during
installation. Confirm with OK.
9 The device turns off and on again. After a
short time the Language selection screen
appears. The firmware update is now com-
pleted.
Notice
If an error occurs during the firmware
update process retry the procedure or
contact your dealer.
19