Advertisement
Advertisement
Table of Contents
Related Manuals for Trelawny 735.7070
Summary of Contents for Trelawny 735.7070
- Page 1 4” ANGLE GRINDER OPERATION & MAINTENANCE...
-
Page 2: Operation
Grinder, please do not hesitate to strongly recommended that an air filter, Ensure tools maintained contact your local Trelawny dealer or regulator, lubricator is used, this will supply according to our recommendations, and agent. We always welcome feedback clean, lubricated air at the correct pressure... -
Page 3: Putting Into Service
OPERATION Putting into service Check that the material being worked will Pull off pinion assembly from motor not cause harmful dust or fumes. If this is assembly and press apart pinion (15) and Remove plastic bung from air so then special breathing apparatus may bearing (18). -
Page 4: Maintenance
MAINTENANCE For the motor make sure that the end This machine has a speed controller or Reassembly plates that abut the cylinder are free from governor, parts (21), (28), (42), (44), (45) Clean all parts and examine for wear. burrs and sharp edges and if necessary and (46). -
Page 5: Safety Rules
SAFETY RULES Safety Rules for a Grinder 1) Read all the instructions before using this tool. All operators must be fully trained in its use and aware of these safety rules. 2) Do not exceed the maximum working air pressure. 3) Use personal protective safety equipment. -
Page 6: Parts List
© Copyright 2013, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies to trademarks, model denominations, part numbers and drawings.
Need help?
Do you have a question about the 735.7070 and is the answer not in the manual?
Questions and answers