Related Manuals for Trelawny 735.7072
Summary of Contents for Trelawny 735.7072
- Page 1 4’’ Vibration Reduced Angle Grinder Operation and Maintenance Manual www.trelawnyspt.co.uk...
-
Page 4: Operation
Trelawny dealer or agent. We personal protective equipment [PPE] Disconnect the air line and pour into the always welcome feedback particularly gloves and clothing to... - Page 5 OPERATION Pre-Start Check (Daily) Dismantling & Assembly Do not over tighten as this could crack the wheel. It should be tight enough to Check all bolts and screws for Instructions tightness. prevent wheel spin off when the air The dismantling and assembly will supply is shut off.
- Page 6 Dismantling the Spindle Remove the Screw (27) along with Support the Front Plate (19) with the oil sealing O’Ring (7) using a Philips screw groove upper most and ensuring there assembly driver. is enough clearance for the bearing to Support the bearing (28) with the pass.
- Page 7 Insert the rotor Blades, angled edge Support the Spindle (33) under the Fit the O’Ring (66) onto the Exhaust first into each groove with a coating of Deflector (53) and push into the end of boss, threaded end down, use the oil to keep them in place (do not use the Motor Housing (1).
-
Page 8: Maintenance
MAINTENANCE EXPLODED VIEW TECHNICAL SPECIFICATIONS Description 4” VL Air Grinder Weight 1.70kg/3.75lbs Spindle dia Power requirements 10cfm@90psi (1/4”BSP inlet) Maximum air pressure 7 bar (100psi) No load RPM 10,000 RPM Recommended hose bore - to a max length 10 metres 10mm (3/8”) Vibration (AEQ) Primary hand position (trigger position) -
Page 9: Safety Rules
SAFETY RULES Safety Rules for a Grinder 1) Read all the instructions before using this tool. All operators must be fully trained in its use and aware of these safety rules. 2) Do not exceed the maximum working air pressure. 3) Use personal protective safety equipment. -
Page 10: Parts List
© Copyright 2013, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies to trademarks, model denominations, part numbers and drawings. - Page 11 NOTES...
- Page 12 NOTES...
- Page 13 NOTES...
- Page 14 Trelawny SPT Ltd 13 Highdown Road, Sydenham Industrial Estate, Leamington Spa, Warwickshire, CV31 1XT, United Kingdom Telephone: +44 (0)1926 883781 - Fax: +44 (0)1926 450352 Email: sales@trelawny.co.uk www.trelawnyspt.co.uk © TSPT UK 2013 Part No: 735.7072 issue 17.11.16...
Need help?
Do you have a question about the 735.7072 and is the answer not in the manual?
Questions and answers