Jenn-Air M168 Series Use And Care Manual page 24

Q. When I touch the Start/Stop Pad, the oven makes a buzzing sound.
What causes this?
A. This is normal and indicates that the oven ksworking properly.
Q. Why does the Display sometimes count down after pushing the Start/
Stop Pad, but the oven doesn't start cooking?
A. ThedoorisnotcompLetelyclosed. Openthedoorandre-closefirmly. Touch
the Start/Stop Pad and the oven will start cooking.
Q. Can I open the door when the oven is operating?
A. The door can be opened anytime dudng the cooking operation; the oven will
automatically stop cooking and the time setting will maintain until the door
is closed and the Start/Stop Pad Jstouched,
Q. What causes the oven interior light and display to dim when using a
Variable Power Level?
A. This is normal and indicates the oven ksoperating and cycling properly.
Q. Why does steam and/or vapor escape around the door and moisture
droplets form on the inside of oven door?
A. This is a normal occurrence - as food cooks, steam is given off.
Q What do the various beeps mean?
A. Long (3 second) beep = timer has completed its countdown.
Short beep -- correct entry; During some codes - one beep signals you to
check the food.
Two short beeps = incorrect entry.
Two long beeps = between cooking stages. During some codes, the oven
will automatically turn off. At this point, check food to see if stirring or
turning is required.
Four short beeps = end of cooking (microwave will turn off).
Q. What causes a clicking sound when using Cook By Weight Code?
A. This is normal and indicates that the oven is cycling properly,
24