BMW K1200 R Rider's Manual page 116

• Press the bulb into its socket
6
and turn it counter-clock-
wise to remove.
114
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
Replacing front/rear turn
indicator bulbs
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.
• Remove screw 1.
• Pull the fastener side to
remove the glass from the
turn-indicator housing.
• Press bulb 2 into socket 3
and turn it counter-clock-
wise to remove.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.