BMW K1200 R Rider's Manual page 104

6
102
• Raise the front wheel, install
quick-release axle 6 and
tighten to 50 Nm.
• Tighten right axle clamping
screw 5 to 19 Nm.
• Remove the front wheel
stand.
• Slip the brake calipers onto
the brake discs.
• Install securing screws 2 for
the left and right brake cali-
pers and tighten to 30 Nm.
The cable of the ABS
sensor could chafe
through if it comes into con-
tact with the brake disc.
Route the ABS sensor cable
well clear of the brake disc.c
• Install the wheel-guide cover
and hand-tighten securing
screws 1.
• Remove the adhesive tape
from the wheel rim.
The front brakes have to be
operated a few times to bed
the brake pads against the
brake discs.