Engine Bottom Side; Neutral Switch; Starter Cup; Secondary Driven Bevel Gear - Suzuki Ozark Service Manual

PISTON
• Remove the piston by removing the piston pin circlip 1.
NOTE:
Place a rag under the piston so as not to drop the piston pin cir-
clip into the crankcase.

ENGINE BOTTOM SIDE

NEUTRAL SWITCH

• Remove the neutral switch.
• Remove the springs and pins.

STARTER CUP

• Remove the starter cup nut by using a suitable bar.
• Remove the starter cup.

SECONDARY DRIVEN BEVEL GEAR

• Remove the secondary driven bevel gear cover.
• Remove the secondary driven bevel gear assembly 1.
ENGINE 3-15