System Specifications - Lenovo RackSwitch G8264CS Product Manual

The front panel of the G8264CS includes the following components:
LEDs that display the status of the switch and the network.
One Mini-USB RS-232 console port that provides another means to configure the switch.
One USB port for mass storage devices.
36x SFP/SFP+ ports to attach SFP/SFP+ transceivers for 1 Gb or 10 Gb Ethernet connections or
DAC cables for 10 Gb Ethernet connections.
12x Omni Ports to attach SFP+ transceivers for 4/8 Gb Fibre Channel or 10 Gb Ethernet connections
or DAC cables for 10 Gb Ethernet connections.
4x QSFP+ ports to attach QSFP+ transceivers or DAC cables for 40 Gb or 4x 10 Gb Ethernet
connections.
One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.
The rear panel of the RackSwitch G8264CS is shown in the following figure.
Figure 3. Rear panel of the RackSwitch G8264CS
The rear panel of the G8264CS includes the following components:
Two redundnat hot-swap AC power supplies (IEC 320-C14 power connector)
Four 3+1 redundant hot-swap fan assemblies

System specifications

The following table lists the RackSwitch G8264CS system specifications.
Table 1. System specifications
Component Specification
Form factor 1U rack mount
Ports
Lenovo RackSwitch G8264CS
36x SFP/SFP+ ports (for 1 GbE SFP or 10 GbE SFP+ media)
12x SFP+ Omni Ports (for 10 GbE SFP+ or 8 Gb SFP+ FC media; no 1 GbE SFPs)
4x QSFP+ ports (for 40 GbE QSFP+ media)
4