Preface Your unit has been built in accordance with the latest state of the art technology. Persons installing the unit, placing it into operation, operating, maintaining and repairing it must read and understand the operating instructions and especially the user safety instructions before the unit is used for the first time.
In order to provide for maintenance of a tan, a maximum of two (2) weekly 15 minute sessions is recommended from the fifth week onward. USE PROTECTIVE EYEWEAR (Schmerter model no. 2255, PC MARKETING ART. NO 81455) WHENEVER THE EQUIPMENT IS ENERGIZED. READ THE INSTRUCTION BOOKLET BEFORE USING...
Page 4
WARNING: If you have been diagnosed by a physician as being allergic to the sun or are currently taking photo- sensitive medications, consult your physician before using this product. Children, persons with fair skin, elderly persons and persons who have a history of skin problems or believe yourself especially sensitive to sunlight, should avoid using this product.
Maintenance work, repair work should only be performed by a qualified service technician or by persons authorized by PC Marketing, Inc. If unaut-horized modifications are made on the units, the manufacturer will not accept liability for any resulting damage or injury.
1.8 Location of the Person Using the Unit In front of the unit and in the unit’s interior tanning space. 2 OPERATION / INFORMATION FOR THE USER OF THE UNIT 2.1 Start of Tanning Observe the recommended exposure chart. Do not exceed the tanning time recommended for your skin type.
DO NOT pour or spill liquid over unit. After every tanning session, clean the acrylic sheet with PC Marketing’s acrylic cleaner. When using the cleaner, spray it on the acrylic sheet, let sit as directed on label. Always dry it off with a clean cloth.
Page 8
• Assembly of the pistons. (figure 7) Both pistons must be installed when assembling your new tanning unit on site. Insert the pistons in the stand before the canopy is mounted. TROPICAL SERIES 41 U·P·P: 2 pistons with 950 N...
Switch the rocker switch (54) to coin operation or if the equipment is to be used privately, to timer operation (see chapter 9, Privately Operated Unit) Always read the total operating hours from the operating hours counter (34) Mount the cover plate (19) by screwing in the screws (20).
• DO NOT place any malfunctioning units into operation. • Disinfect the acrylic shield with a UVT (ultraviolet transmitting) acrylic cleaner • supplied by PC MARKETING. • Provide protective eyewear and require their use during tanning. • Observe and follow recommended exposure schedule which lists skin type, •...
Only authorized technicians should work on this unit. Working procedures which jeopardize the safety of the unit must not be used. Always obtain genuine spare parts through PC Marketing. DO NOT operate the unit without the acrylics in place.
If you have touched it by accident, wipe off your fingerprints by means of a clean cloth moistened with alcohol. To obtain replacement tanning lamps for the high pressure facial tanners, please contact PC Marketing. No liability can be accepted if replacements other then genuine lamps, and starters are installed. • Cleaning the reflectors Before you insert the new lamps, wipe the reflectors by means of a cloth moistened with alcohol.
You must check the filters after every 200 hours of operation; the filters must not be more then half clogged Obtain genuine filter pads through PC Marketing or your authorized distributor only. • • • • • Changing the filter on the lounge (Figure 2) Pull the front cover (18) off forwards.
Page 14
Any electrical shorts should be checked by an authorized technician approved by PC Marketing. • • • • • The canopy or the lounge gets too hot. Check whether the air intake filters (filter pads) are clogged. In the case of units with direct discharge of air, ensure that the heated cooling air is passed into the outside atmosphere without excessive resistance.
End User by a PC Marketing Inc. Distributor, such representations, warranties and commitments will be those of the PC Marketing Inc. Distributor alone, and will not be attributed to PC Marketing Inc. and PC Marketing Inc. shall not be responsible for same.
Page 18
State of New Jersey, and the United States of America, conflict of laws notwithstanding. This Warranty, and all claims in any such claims, disputes or actions is domiciled. PC Marketing Inc., Distributor and End User hereby agree to submit to the subject matter and personal jurisdiction and venue of said courts to resolve any disputes.