Configure System Log - Paradyne 6218-I1 User Manual

7. Management

Configure System Log

If the log is enabled, the system will log selected events: Emergency, Alert, Critical,
Error, Warning, Notice, Informational, and Debugging. All events above or equal to
the selected log levels will be logged (maintained in the system log file) and
displayed.
If the selected mode is Remote or Both, events will be sent to the specified IP
address and UDP port of a remote system log server. If the selected mode is Local
or Both, events will be recorded in the local memory.
Figure 7-12. System Log Configuration
Select the desired values and click on the "Save/Apply" button to configure the
system log options.
7-8
September 2005 6218-A2-GB23-00