Quick Setup with Auto-Connect Disabled
Procedure
Figure 4-4.
Figure 4-5.
6218-A2-GB23-00
1. Select Quick Setup. The Quick Setup initial screen appears.
2. Verify that DSL Auto-Connect is not selected. Entry boxes for VPI and VCI
appear when DSL Auto-Connect is not selected.
3. Specify VPI and VCI as directed by your ISP.
Specifying VPI and VCI
4. Click on Next. The Connection Type screen appears.
Connection Type
5. Select the protocol and encapsulation type required by your ISP.
September 2005
4. Quick Setup
4-3