Capability
The following are included under Capability:
Do not change these settings unless so directed by your ISP.
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP. To view
the DSL Advanced Settings screen, click on the Advanced Settings button on the
DSL Settings screen (see
Figure 5-36. DSL Advanced Settings
There are five test modes between the router and your ISP:
6218-A2-GB23-00
Bitswap Enable
SRA (Seamless Rate Adaptation) Enable
Figure
Normal test: Puts the router in a test mode in which it only sends a Normal
signal.
Reverb test: Puts the router in a test mode in which it only sends a Reverb
signal.
Medley test: Puts the router in a test mode in which it only sends a Medley
signal.
September 2005
5-35).
5. Advanced Setup
5-23