Quality Of Service - Paradyne 6218-I1 User Manual

5. Advanced Setup

Quality of Service

You can configure the Quality of Service to apply different priorities to traffic on the
router.
Figure 5-25. Quality of Service Setup
Click on Add and the Add Network Traffic Class Rule screen appears. To add a
rule:
5-16
1. Give a name to this traffic class.
2. Assign a priority level-low, medium, and high-to this traffic class.
3. Select an IP precedence from the range of 0–7.
4. Enter an IP Type of Service from the following selections-
— Normal Service
— Minimize Cost
— Maximize Reliability
— Maximize Throughput
— Minimize Delay
5. Last, enter the traffic conditions for the class such as the protocol (TCP / UDP,
TCP, UDP, or ICMP) to be used.
6. Click on Save / Apply to save the settings.
September 2005 6218-A2-GB23-00