ADSL BER Test
The ADSL Bit Error Rate (BER) test determines the quality of the ADSL
connection. The test is performed by transferring idle cells containing a known
pattern and comparing the received data with this known pattern to check for any
errors
Procedure
To run a BER test:
Figure 3-8.
Figure 3-9.
6218-A2-GB23-00
(Figure 3-8
and
Figure
1. Click on the ADSL BER Test button.
2. Select the test duration and click on Start
3. Check the result.
ADSL BER Test — Start
ADSL BER Test — Result
September 2005
3-9).
3. Device Information
3-5