Standards Compliance For Snmp Traps; Snmp Traps; Warmstart; Authenticationfailure - Paradyne Hotwire 7975 User Manual

Standards Compliance for

SNMP Traps

SNMP Traps

warmStart

authenticationFailure

7975-A2-GB20-40
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
H
warmStart
H
authenticationFailure
H
linkUp
H
linkDown
SNMP Trap Description
warmStart The unit has reinitialized
itself.
The trap is sent after the
unit resets and stabilizes.
There are no
variable-bindings.
SNMP Trap Description
authenticationFailure Failed attempts to access
the unit.
There are no
variable-bindings.
December 1998
B
Possible Cause
H
Reset command.
H
Power disruption.
Possible Cause
Three unsuccessful attempts
were made to enter a correct
login/password combination.
B-1