H Enterprise-Specific Traps - Paradyne Hotwire 7975 User Manual

Enterprise-Specific Traps
The enterpriseSpecific trap indicates that an enterprise-specific event has
occurred. The Specific-trap field identifies the particular trap that occurred. The
following table lists the enterprise-specific traps supported by the unit:
There are no variable-bindings for enterpriseDeviceFail and
enterpriseConfigChange. The variable-binding for enterpriseSelfTestFail is
devSelfTestResults.
7975-A2-GB20-40
SNMP Trap
enterpriseSelfTestFail(2)
enterpriseDeviceFail(3)
enterpriseTestStart(5)
enterpriseConfigChange(6)
enterpriseFallback
AutoRate(13)
enterpriseFallback
AutoRateclear(113)
enterpriseTestStop(105)
December 1998
Standards Compliance for SNMP Traps
Description
A hardware failure of the
unit is detected during the
unit's self-test. The trap is
generated after the unit
completes initialization.
An internal device failure.
A test is running.
The configuration changed
via the user interface. The
trap is sent after
60 seconds have elapsed
without another change.
This suppresses the
sending of numerous traps
when multiple changes are
made in a short period of
time, as is typically the
case when changing
configuration options.
All tests have been halted.
Possible Cause
Failure of one or more of the
unit's hardware
components.
Operating software has
detected an internal device
failure.
At least one test has been
started on an interface.
Configuration has been
changed via the ATI.
All tests have been halted
on an interface.
B-3