Status Sense3 (B1H) - Sony HVO-500MD Protocol Manual

5-10-6. STATUS SENSE3 (B1H)

This asks for information about the device status. In response to this command, a 12-byte status described
in the following table will be returned.
bit 7 bit 6
byte 1 DVD running hours/1000
byte 2 DVD running hours/10
byte 3 DVD recording hours/1000
byte 4 DVD recording hours/10
byte 5 HDD running hours/1000
byte 6 HDD running hours/10
byte 7 0 0
byte 8 TRAY OPEN/CLOSE/1000
byte 9 TRAY OPEN/CLOSE/10
byte 10 SYSTEM ERR./1000
byte 11 0 0
byte 12 SYSTEM ERR./10
Bit configuration of status data
Byte 1
bit 7 to bit 4 : DVD drive power ON hours/1000
bit 3 to bit 0 : DVD drive power ON hours/100
Byte 2
bit 7 to bit 4 : DVD drive power ON hours/10
bit 3 to bit 0 : DVD drive power ON hours/1
Byte 3
bit 7 to bit 4 : DVD drive accumulated recording hours/1000
bit 3 to bit 0 : DVD drive accumulated recording hours/100
Byte 4
bit 7 to bit 4 : DVD drive accumulated recording hours/10
bit 3 to bit 0 : DVD drive accumulated recording hours/1
Byte 5
bit 7 to bit 4 : HDD power ON hours/1000
bit 3 to bit 0 : HDD power ON hours/100
Byte 6
bit 7 to bit 4 : HDD power ON hours/10
bit 3 to bit 0 : HDD power ON hours/1
Byte 7
bit 7 to bit 4 : always 0
bit 3 to bit 0 : number of times of TRAY open & close/10000
Byte 8
bit 7 to bit 4 : number of times of TRAY open & close/1000
bit 3 to bit 0 : number of times of TRAY open & close/100
40
bit 5 bit 4
0 0
0 0
bit 3 bit 2
DVD running hours/100
DVD running hours/1
DVD recording hours/100
DVD recording hours/1
HDD running hours/100
HDD running hours/1
TRAY OPEN/CLOSE/10000
TRAY OPEN/CLOSE/100
TRAY OPEN/CLOSE/1
SYSTEM ERR./100
0 0
SYSTEM ERR./1
bit 1 bit 0
0 0
HVO-500MD/550MD