Paradyne COMSPHERE 3821PLUS User Manual page 31

Call Disconnect
Messages,
continued
LongSpace Disc The modem has disconnected due to the detection of a long space.
NoData Disc The modem has disconnected due to a lack of transmitted and received data.
Disconnecting The modem has begun the disconnect sequence.
Rmt Cmnded Disc The modem has disconnected due to a V.32 or V.34 Cleardown received from the remote
modem.
Firmware
Download Result
Messages
DownldOnly Mode Indicates that a local download of firmware or a remote cloning of firmware has failed. The
modem is currently in a Download Only mode in which only another download attempt is
possible.
Frmware Upgrade Indicates that a local download of firmware or a remote cloning of firmware was successful.
RemClone Failed Displays on the local modem's LCD and indicates that a remote cloning of firmware has failed.
Remote Clone OK Displays on the local modem's LCD and indicates that a remote cloning of firmware was
successful.
AT Command
Reset Message
Reset by AT command The modem has performed a reset in response to an ATZ command.
Common
Operational
Messages
Please Wait... Appears when a command to a local device takes more than two seconds to complete.
Command Sent... Appears when a command is sent to a remote modem.
No Rem Response or Appears when a remote modem does not respond to a command within 5 seconds.
Remote Modem Fail
Command Complete Appears when a command, issued to a local or remote modem, is completed.
Invalid Command Appears when the modem cannot complete a command.
3821-A2-GB20-40
Table 3-1
(3 of 3)
Top-Level Menu Status
Indicates
Indicates
Indicates
Table 3-2
Common Operational Messages
Indicates
January 1999
SDCP Menus
3-5