Table of Contents
Advertisement
-4-
Starting the test
-1-
Understanding the test results
During the test aurora
each TEI in the range being tested. The Status bar displays the
TEI currently being checked. When the test is complete,
aurora
Sonata
aurora
Sonata
component, and you can view them from the Review Results
menu (see section 1). For example:
Issue 2 - 07/00
Testing in Simulation Mode - Section 4
•
Select Last TEI and repeat the process for
the last TEI in the test range.
When you have set up the test details, press
ESC to return to the Line Configuration
component display and ESC again to return to
the main ISDN Test Suite.
With Line Config. highlighted, press the Go
function key.
displays the result (Pass or Fail) for
Sonata
lists the results for all TEIs in the tested range.
stores the most recent set of results for the
4-53
Advertisement
Table of Contents
