Table of Contents
Advertisement
Note
If you set a new CPN here, it is used for all components of all
one-button tests.
Tip
You can use the Recall and Save function keys to access
numbers in aurora
section 1).
-7-
-8-
-9-
Note
During the test any incoming calls are answered automatically
and a loop applied to the relevant B channel, irrespective of
call type and answer mode settings.
Issue 2 - 07/00
Testing in Simulation Mode - Section 2
instructions). For a self call, the CPN is the
number of the line to which aurora
connected. With the ETSI protocol, you can
also select SUB and enter a sub-address if
required.
's speed-dial directory (see Chapter 6
Sonata
To select the BERT pattern for the test:
•
Select Pattern.
•
Highlight the pattern you require and press
ENTER to close the option window.
When you have set up the test details, press
ESC to return to the Line quality component
display and ESC again to return to the main
ISDN Test Suite.
With Line quality still highlighted, press the
Go function key.
is
Sonata
4-35
Advertisement
Table of Contents
