S-11-P - Pioneer VSX-321-K-P Service Manual

1

7.3 S-11-P

A
Removing the FRONT / SURROUND SPEAKER
1. Remove the four screws.
2. Press on the grille bottom with both thumbs and slide it in frontward
direction of the speaker while pressing with sufficient force. (Fig.1)
3. Press on the grille bottom with both thumbs and slide it in frontward
direction of the speaker while pressing with sufficient force. (Fig.2)
4. Disconnect the cable, and then remove the speaker unit.
Note: When attaching speaker unit, face its terminal leftward.
Use other fingers
B
to support the
Cabinet front.
C
D
Removing the CENTER SPEAKER
1. Remove the eight screws.
2. Press on the side of the grille with both thumbs and slide it in frontward
direction of the speaker while pressing with sufficient force. (Fig.3)
3. Similar procedures for the sides of the opposite end.
4. Disconnect the cable, and then remove the speaker unit.
Note: When attaching speaker unit, face its terminal leftward.
E
Use other fingers
to support the
Cabinet front.
F
48
1
2
Fig.1
Fig.2
Fig.3
HTP-071
2
3
Use other fingers to
support the Cabinet front.
Use other fingers to
support the Cabinet front.
3
4
4