Delta 36-426 Instruction Manual page 19

ASSEMBLING
EXTENSION WING
1. Assemble extension wing (A) Fig. 39, to the saw
table using three 7/16-20 x 1-1/4" screws (B) and
lockwashers (C) Fig. 39.
2. With a straight edge (D) Fig. 39, make certain the
extension wing (A) is level with the saw table before
tightening three screws (B) Fig. 40.
ASSEMBLING SWITCH
TO EXTENSION WING
1. Assemble switch (A) Fig. 41, behind the lip of
extension wing (B) insert 5/16-18 x 1" flat head screw
(C), then assemble flat washer, and locknut.
2. Fig. 42 illustrates the switch assembled to the
extension wing.
A
19
C
D
B
Fig. 39
B
Fig. 40
C
B
A
Fig. 41
Fig. 42