Honda crf250r 2012 Owner's Manual page 54

7. Connect the fuel pump red (18) and black (19)
wire terminals to the fuel pump base terminals
(20).
Push the wire terminals until they stops as
shown.
Be careful not to damage the wires.
8. Apply 0.5 g maximum of engine oil to a new
O-ring (21).
Install a new O-ring onto the fuel pump unit
(22).
(18)
(21)
(19)
(18)
(20)
(18) red wire terminal
(19) black wire terminal
(20) fuel pump base terminals
(21) O-ring (new)
(22) fuel pump unit
9. Install a new O-ring (23) into the fuel tank
groove.
10. Install the fuel pump unit (24) into the fuel
tank (25).
Be careful not to damage the wires.
(25) (23)
(22)
(19)
(23) O-ring (new)
(24) fuel pump unit
11. Install the fuel pump plate (26) with its
identification mark (27) facing toward the
front side and facing up.
(27)
(26)
(26) fuel pump plate
12. Install the conical spring washers (28), collars
(29), washers (30), stopper cable (31), stopper
cable guide (32) and fuel pump mounting
bolts (33).
13. Install the fuel tank.
Make sure that the convex surface of the conical
spring washers are upside.
(24)
(28) (29)
(32)
(25) fuel tank (28) conical spring washers
(29) collars
(30) washers
(31) stopper cable
(32) stopper cable guide
(33) fuel pump mounting bolts
14. Tighten the fuel pump mounting bolts to the
specified torque in the specified sequence as
shown.
8 lbf·ft (11 N·m, 1.1 kgf·m)
(27) identification mark
15. Connect the fuel line (page 42).
16. Increase the fuel pressure (page 48).
Fuel System
(31)
(33)
(28) (29)
Servicing Your Honda
(30) (33)
47