Honda crf250r 2012 Owner's Manual page 109

Exhaust Pipe/Muffler
8. Install the right side cover (12) and bolt (13).
9. Install the seat mounting bolt (14) and tighten
it to the specified torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
Tighten the bolt (12) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(14)
(12)
(13)
(12) right side cover (14) seat mounting bolt
(13) bolt
102
Servicing Your Honda
Exhaust Pipe Removal
1. Remove the muffler (page 100).
2. Remove the exhaust pipe joint nuts (1),
exhaust pipe (2) and gasket (3).
(1)
(3)
(2)
(1) exhaust pipe joint nuts
(2) exhaust pipe
(3) gasket
Exhaust Pipe Installation
1. Install a new exhaust pipe gasket (1) as
shown.
2. Install the exhaust pipe (2) and exhaust pipe
joint nuts (3).
(1)
(1) exhaust pipe gasket (new)
(2) exhaust pipe
(3) exhaust pipe joint nuts
3. Install the muffler (page 101) but do not
tighten the bolts yet.
4. Tighten the exhaust pipe joint nuts to the
specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
5. Tighten the muffler clamp bolt, muffler
mounting A bolt and B bolt (page 101).
6. Installation can be done in the reverse order of
removal.
(3)
(2)