Table of Contents
Advertisement
L
28
49
17
(d)
28
49
(c)
A
17 3/8 X 1-3/4"
(a)
B
10 3/8 X 4"
11 3/8 X 3-3/4"
FIGURE 28
STEP 28:
• Assemble one 3-1/2" PULLEY (49) to the BASE PLATES (B) using one 3/8 X 4" BOLT (10), one 3/8 X 15/16" SPACER (30) and one 3/8"
LOCK NUT (28). See FIGURE 28(a) (Note: Loop the LOW CABLE (AW) around the PULLEY prior to assembling the PULLEY to the
BASE PLATES.)
• Route the LOW CABLE (AW) around one 3-1/2" PULLEY (49) and assemble the 3-1/2" PULLEY (49) to the PULLEY PLATES (L) using
one 3/8 X 1-3/4" BOLT (17) and one 3/8" LOCK NUT (28). See FIGURE 28(b)
• Assemble one 3-1/2" PULLEY (49) to the BASE PLATES (B) using one 3/8 X 3-3/4" BOLT (11), one 3/8 X 15/16" SPACER (30) and one
3/8" LOCK NUT (28). See FIGURE 28(a) (Note: Loop the LOW CABLE (AW) around the PULLEY prior to assembling the PULLEY to
the BASE PLATES.)
• Route the LOW CABLE (AW) around one 3-1/2" PULLEY (49) and assemble the 3-1/2" PULLEY (49) to the bracket on the BASE (A) using
one 3/8 X 1-3/4" BOLT (17) and one 3/8" LOCK NUT (28). See FIGURE 28(c)
• Route the LOW CABLE (AW) around one 3-1/2" PULLEY (49) and assemble the 3-1/2" PULLEY (49) to the PULLEY PLATES (L) using
one 3/8 X 1-3/4" BOLT (17) and one 3/8" LOCK NUT (28). See FIGURE 28(d)
28
49
30
26
28
L
49
17
3/8 X 1-3/4"
(b)
Hide quick links:
Advertisement
Table of Contents
