ParaBody 950 st Assembly Instructions Manual page 14

STEP 1 1
A.
gEE ])ETA, IL
Securely assemble two 3/8" spring pins (62) to the leg curl/extension (8) as shown.
B. Apply eight 1-1/2 x 3/4" glides (63) to the outside surfaces of each roller .pad adiuster (34)
shown, and insert roller pad adjusters (34) into the leg curl/extension (B). (.Note: The end caps
will need to be temporarily removed.) ,
C.
Securely assemble leg frame (14) to the leg weight slack base (18) using two x 3- 1/ 4" bolt s
(89), four 1/2" washers (79), and two 1/2 nylock nuts (B2).
D.
Attach. ,f, our roller pads (19) to the leg curl/extension (8) and roller pad adjusters ('34) using two
15-3/4 roller pad shafts (27), eight plastic washers (55) and four 3/4" starlock ,iollars (54) as
¯ -
14